OSP Aluminum PCB for LED Lighting – 1.0 W/m·K Thermal Conductivity with Oxidation-Resistant Copper Finish

OSP aluminum PCB for LED lighting with 1.0 W/m·K thermal conductivity, single-sided copper on an aluminum base and a lead-free OSP finish on flat copper pads. Made in China for LED driver and lighting boards.

Description

OSP aluminum PCB is a single-sided metal-core circuit board that pairs a 1.0 W/m·K thermal dielectric with an organic solderability preservative (OSP) film on the copper pads, so LED lighting and driver boards stay flat, lead-free and ready to solder.

What Is an OSP Aluminum PCB?

An aluminum PCB, also known as an aluminum-based MCPCB (metal core PCB), bonds a copper circuit layer to an aluminum base through a thermally conductive dielectric. The aluminum base spreads heat away from LEDs, inductors, diodes and driver ICs. OSP is the surface finish: a thin organic film applied only to exposed copper pads, which protects the copper from oxidation until the board goes through SMT assembly. The aluminum base side is left as bare metal, as shown in the product photos.

Why Choose OSP for LED Lighting Aluminum Boards?

  • Flat pads for SMD placement. OSP leaves the copper surface level, which suits fine-pitch ICs, small passives and the large power pads used on LED driver layouts.
  • No molten-solder dip. HASL immerses the board in molten solder. OSP skips that thermal shock, which is a sensible consideration on a metal-core board with a dielectric layer.
  • Lead-free and RoHS-friendly. The film contains no lead, which fits LED lighting products sold to regulated markets.
  • Cost-effective. For high-volume LED boards, OSP is usually the more economical finish compared with gold-based options.

1.0 W/m·K Thermal Conductivity: Where It Fits

A 1.0 W/m·K dielectric is a practical choice for general LED lighting boards and driver boards where heat load is moderate. It moves heat into the aluminum base far more effectively than a standard FR-4 board. For higher-power designs, the dielectric grade is a decision to make at the quotation stage, so send your LED wattage and layout to our engineers and we will confirm whether 1.0 W/m·K is enough.

OSP Aluminum PCB Specifications

Parameter Specification
Product OSP Aluminum PCB (MCPCB) for LED Lighting
Base Material Aluminum base
Thermal Conductivity 1.0 W/m·K
Surface Finish OSP (Organic Solderability Preservative)
Structure Single-sided copper circuit on aluminum base
Solder Mask / Silkscreen Black / White (as pictured)
Typical Applications LED lighting, LED driver boards, stage lighting driver boards
Panelization Customer-specific panel layout
Origin Made in China

OSP vs HASL on Aluminum Substrates

Both finishes are available on aluminum boards. OSP gives flatter pads and a lead-free surface, while a HASL aluminum PCB gives a thicker solderable coating and a longer storage window. If your assembly line is ready to solder soon after delivery, OSP is a clean and economical choice. If boards will sit in stock for a long time, compare it with HASL first.

Handling and Storage Notes

As a PCB company from China, we recommend confirming the reflow profile with us before a first OSP aluminum build so the pad finish and your assembly plan match. OSP is an organic film, so it is time-sensitive: keep boards sealed in their original packaging, assemble within the storage window agreed at order confirmation, and avoid touching the pads with bare hands. OSP pads are also not suited to contact surfaces such as keypads or edge connectors.

Applications

  • LED lighting boards and LED driver boards
  • Buck and constant-current driver layouts with power inductors and diodes
  • Stage lighting electronics, see our stage lighting driver board PCBA
  • Lighting products that need lead-free, flat-pad SMT assembly

As a PCB company from China, Guangzhou Mingen Electronics Co., Ltd. (CHNPCB) manufactures single-sided, double-sided and aluminum PCBs, including OSP, HASL and other finishes on aluminum substrates, for customers in Singapore, TaiWan,Korea,Australia, Europe and other export markets. To discuss your OSP aluminum PCB for LED lighting,

send your Gerber files and quantity to PCB@CHNPCB.COM.

Reviews

There are no reviews yet.

Be the first to review “OSP Aluminum PCB for LED Lighting – 1.0 W/m·K Thermal Conductivity with Oxidation-Resistant Copper Finish”

Your email address will not be published. Required fields are marked *